Arena Rex Forums http://redrepublicgames.com/forum/ |
|
Laser Cut Arena Walls http://redrepublicgames.com/forum/viewtopic.php?f=6&t=42937 |
Page 1 of 3 |
Author: | RoboCaveman [ Wed Jan 03, 2018 2:41 pm ] |
Post subject: | Laser Cut Arena Walls |
I recently created this set of arena walls using my maker-space's laser cutter to use with arena rex. I plan to release it on my website at some point but I wanted to get some feedback from people on here first that have any suggestions. One I have already, is interlocking pieces so it stays in a circle but can still be separated into smaller parts like I wanted, for transportation. and I'll probably cover up those joins on the top of the walls with another curved piece. (PS. I made those risers last minute because I forgot that this was going to sit on the outside of my sandy circle which I made using insulation foam, so I needed to have the walls sit up higher since I didn't want to add any extra foam. If anyone else wanted a set they wouldn't be part of it.) |
Author: | Wishing [ Wed Jan 03, 2018 5:15 pm ] |
Post subject: | Re: Laser Cut Arena Walls |
My only thought right now is... wow, that looks super awesome. |
Author: | KaptainWalrus [ Thu Jan 04, 2018 10:12 am ] |
Post subject: | Re: Laser Cut Arena Walls |
Agreed, that looks great! Very nicely detailed. I would be interested to see the separated individual components, to get an idea of how well it could be transported if needed. |
Author: | RoboCaveman [ Thu Jan 04, 2018 7:44 pm ] |
Post subject: | Re: Laser Cut Arena Walls |
Here's the size comparison with Aemilia. The total inside diameter is 29in. Each wall sits at 4.5in. and the gate is 6.5in There's four wall sections along with the gate section. And you can see those risers I haphazardly stuck on the bottom of the walls. |
Author: | Wishing [ Fri Jan 05, 2018 4:02 am ] |
Post subject: | Re: Laser Cut Arena Walls |
Can I have one? |
Author: | DanV. [ Fri Jan 05, 2018 8:39 am ] |
Post subject: | Re: Laser Cut Arena Walls |
WOW! Man, you gotta sell these! |
Author: | ripper.mcguirl [ Fri Jan 05, 2018 7:40 pm ] |
Post subject: | Re: Laser Cut Arena Walls |
These are awesome. If production is tricky, you could check out somewhere like https://everylittlewar.com/pages/become-a-designer that will produce for you and sell on their site under your name. |
Author: | RoboCaveman [ Sun Jan 07, 2018 1:59 am ] |
Post subject: | Re: Laser Cut Arena Walls |
That's an interesting idea, and if at some point the interest in my site becomes too much for me to handle I might look into that route. For now though I like making them myself! I have it up on my site now which you can get to here: https://khepri-creations.com/ (My Morituri preference might be obvious) And since I appreciate everyone that contributes on the forums, you can enter REX2018 at checkout for $5 off your order! |
Author: | Wishing [ Sun Jan 07, 2018 6:36 am ] |
Post subject: | Re: Laser Cut Arena Walls |
Very awesome! I will definitely consider this for the future. You need to correct the site though! You wrote that it is 19 inches in diameter inside, where you mean 29 inches, as far as I can tell. |
Author: | DanV. [ Sun Jan 07, 2018 10:10 am ] |
Post subject: | Re: Laser Cut Arena Walls |
Yeah this definitely looks bigger than 19" in diameter. If it is 29" that would be perfect! |
Page 1 of 3 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |