So in preparation for the wonderful figures that will winging their way to me as part of the Kickstarter campaign, I decided to throw together a little arena.
I started off in Autocad playing around with the idea of a circular then an elongated circle (similar to the chariot tracks) and ended up with this:
I've since started work on the gates, pillars and actual arena.
The pillars are DIY resin work based on a blank I made myself out of 1" polypipe, masking tape and foamboard scraps; gates are from coffee stirrers (bought a big bag from my local wholesaler) and the arena is constructed from 3" foam with an 6mm MDF base and some scraps of balsa and cheap filler( I'll post a WIP pic tonight).
So far I think it is coming together nicely.
Biggest issue is going to be getting the foam level to build the seating off of.
I bought a hot wire cutter but that thick insulation really doesn't like being cut. As a result I'm thinking of building the raised seating out of coffee stirrers, but that is going to take ages to do.
Only other option is to go for a semi-derelict look; which might work as it is a northern arena. Maybe the where the Romans have been pushed back and the Gladiators still compete for the local Pictish hordes.
Any way comments and critique welcomed.