| Arena Rex Forums http://redrepublicgames.com/forum/ |
|
| Painting Questions! http://redrepublicgames.com/forum/viewtopic.php?f=17&t=48787 |
Page 1 of 2 |
| Author: | Captain_Amerika [ Wed Jul 04, 2018 3:02 am ] |
| Post subject: | Painting Questions! |
What do you base your models with? |
|
| Author: | Wishing [ Wed Jul 04, 2018 6:05 am ] |
| Post subject: | Re: Painting Questions! |
I use PVA glue to attach fine sand stolen from a local playground. Works for me. But there are countless options... |
|
| Author: | Captain_Amerika [ Wed Jul 04, 2018 10:45 pm ] |
| Post subject: | Re: Painting Questions! |
Sorry that should have said PRIME* |
|
| Author: | Wishing [ Thu Jul 05, 2018 7:33 am ] |
| Post subject: | Re: Painting Questions! |
Ohhh. I use GW classic chaos black spray. It's all I've ever used, so I'm afraid to try something else... |
|
| Author: | Captain_Amerika [ Thu Jul 05, 2018 8:59 am ] |
| Post subject: | Re: Painting Questions! |
cool! I am afraid the black base will be to dark so I was going with Armoury Grey Primer https://www.miniaturemarket.com/arygg-sp2.html I'm hoping it works well on resin |
|
| Author: | Wishing [ Thu Jul 05, 2018 5:26 pm ] |
| Post subject: | Re: Painting Questions! |
Good luck! |
|
| Author: | Wolf of Winter [ Wed Sep 12, 2018 1:02 pm ] |
| Post subject: | Re: Painting Questions! |
How did you get on with the Armoury stuff? I've only ever had bad experiences with that brand. I find it very finicky with the humidity we get in the warmer months here. I use Duplicolor Sandable Primer matt black or white which I get from the auto store, I swear by the stuff! |
|
| Author: | Varagon [ Wed Sep 12, 2018 2:51 pm ] |
| Post subject: | Re: Painting Questions! |
Wolf of Winter wrote: How did you get on with the Armoury stuff? I've only ever had bad experiences with that brand. I find it very finicky with the humidity we get in the warmer months here. I use Duplicolor Sandable Primer matt black or white which I get from the auto store, I swear by the stuff! I've understood the sandable auto primer is a little thick and can obscure details, but, if you have good results with it, then keep using it. I've almost always used the cheapest can of flat black I can find from Wal-Mart. Vallejo spray-on airbrush primer is the best, though, that I've ever used. |
|
| Author: | Gomez [ Wed Sep 12, 2018 10:49 pm ] |
| Post subject: | Re: Painting Questions! |
I use Krylon ColorMaster white primer from Hobby Lobby or Michael's (if you're in the States). Lots of light coats rather than a single heavy one. Also use an old toothbrush to knock off any fuzz before painting - all works like a charm IMO. |
|
| Author: | Captain_Amerika [ Thu Sep 13, 2018 5:47 am ] |
| Post subject: | Re: Painting Questions! |
It has worked well up until this weekend when priming tanks for Flames of war it kind of "pebbled" leaving a very rough surface |
|
| Page 1 of 2 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|